Egen barkod etiket » Ürünler » P.P Opak Termal Transfer 40 mm x 100 mm Tekli (Ribbonlu)

P.P Opak Termal Transfer 40 mm x 100 mm Tekli (Ribbonlu)

Codeline201, Dış etkenlere dayanıklı,yırtılmaz,suya ve sürtünmeye dirençli P.P Opak Koli ve ürün etiketleri istenilen ebatlarda hızlı üretim ile egen.com.tr da.

1 RULO ADET   :       800 ADET
1 KOLİ ADETİ   : 48.000 ADET
1 KOLİ RULO    : 60 RULO

Stok Kodu: CODELINE201-PO40100.1.40 Kategoriler:

Açıklama

SELF-ADHESIVERULO
FACEPOLYPROPYLENE OPAK BEYAZ 60 MİCRON
Coloured papersCODELINE 201 (Sales Code)
PP ProductA white, glossy, biaxially oriented, cavitated, top-coated polypropylene film.
UseFor personal care and food labelling applications where resistance to water, oil and chemicals is important. Suitable for overprinting using thermal transfer.
Typical technical values
Substance46 g/m² DIN 53352
Caliper61 µm DIN 53370
Tensile strength MD70.0 N/mm² DIN 53455
Tensile strength CD165.0 N/mm² DIN 53455
Opacity80% DIN 53146/1
Gloss90% DIN 67530/1 60°
PrintabilitySuitable for flexography, screen, letterpress and offset printing methods. Special inks designed for non-absorbent materials should be used. For UV printing, consult your ink supplier for ink recommendations. Thermal transfer is also possible with select ribbons.
AdvantagesVery high gloss. Good dimensional stability. High tensile strength, tear strength and stiffness. Good register control.
ApprovalsConformance with the Restriction of certain hazardous substance (RoHS) Directive 2002/95/EC.
Warranty
Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. This publication replaces all previous versions. All information is subject to change without notice.
ADHESIVEHOTMELT
Permanent(Sales Code)
TypePermanent adhesive.
CompositionRubber, hotmelt.
UseRecommended for use in cold environment, particularly if the application surface is moist or if very high initial adhesion is required. Good low temperature performance once labelled. Very good adhesion to non-polar surfaces.
Typical technical values
Tack min14 N FTM 9
Shear min3 h FTM 8
Dynamic shear min20 N/25mm FTM 18
Dynamic shear max40 N/25mm FTM 18
PE-looptack min10 N modified FTM 9
Labelling temperature min-5 °C
Service temperature min-40 °C
Service temperature max50 °C
LimitationsNot suitable for labelling of plasticised PVC.
ApprovalsThe raw materials conform to FDA 21CFR 175.105 (indirect food contact). Accredited laboratory has given the adhesive approval for direct contact with dry and moist, non-fatty foodstuffs and such kind of fatty foodstuffs like dairy products for which according to Commission Regulation (EU) 10/2011 the foodstuff simulants D1 applies.
Shelf lifeTwo years from the date of manufacture in +20°C and RH 50%.
Warranty
Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. This publication replaces all previous versions. All information is subject to change without notice.

İncelemeler

Henüz yorum yapılmadı.

“P.P Opak Termal Transfer 40 mm x 100 mm Tekli (Ribbonlu)” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir